Blodgett ZEPHAIRE-G Spezifikationen PDF herunterladen (Seite 10)

Installation

6

Oven Assembly

LEG ATTACHMENT

1. Lay the oven on its back.

2. Align the threaded stud in each leg with the

nut located inside each bottom corner of the

oven frame. Turn the legs clockwise and tightĆ

en to the nearest full turn.

3. Align the two leg plate holes in each leg with

those in the oven bottom. Secure each leg usĆ

ing two 1/2" bolts.

NOTE: If using casters see CASTER ASĆ

SEMBLY before proceeding.

4. Tip the oven up on the legs.

5. Level the oven by screwing the adjustable leg

feet in or out as necessary.

6" (15 cm) Legs Shown

Figure 4

CASTER ASSEMBLY

NOTE: Install the locking casters on the front of

the oven. Install the nonĆlocking casters on

the back of the oven.

NOTE: Use a gas hose restraint on all units with

casters. See page 13.

Casters for Single and Double Stacked Ovens:

1. Attach the legs as described.

2. Pry the adjustable feet out of the legs.

3. Insert one caster into each leg as shown.

Tighten the lock nuts to secure the casters.

Adjustable

Leg Foot

Caster Assembly

Gas Hose

Restraint Bracket

Figure 5

Low Profile Casters for Double Stacked Ovens:

1. Align the three holes in each caster assembly

plate with those in the oven bottom. Secure

each caster using three 1/2" bolts.

Gas Hose Restraint Bracket

Figure 6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare