Blodgett ZEPHAIRE-G Spezifikationen PDF herunterladen (Seite 11)

Installation

Oven Assembly

DOUBLE SECTION ASSEMBLY

NOTE: Old style ovens refer to units with painted exĆ

posed rear angle. New style ovens refer to

units with rear angle iron enclosed in steel.

The following instructions apply to stacking two

new style ovens.

1. Secure the short legs to the bottom sections

as described.

2. Place the upper section in position on top of

the lower oven.

3. Attach the stacking brackets using the reĆ

maining 5/16" bolts shipped with the ovens.

4. Attach the flue connector.

The following instructions apply to stacking a new

style oven on an old style oven.

1. Secure the short legs to the bottom sections

as described.

2. Place the upper section in position on top of

the lower oven.

3. Attach the stacking brackets using the reĆ

maining 5/16" bolts shipped with the ovens.

4. Drill a clearance hole for a 5/16" bolt in the

angle iron of the old style oven. Use the holes

in the stacking brackets as a pilot.

5. Attach the stacking brackets to the old style

oven with the 5/16" bolts and nuts provided in

the kit.

6. Attach the flue connector.

WARNING!!

When stacking ovens be sure to remove

the single oven flue boxes prior to attachĆ

ing threeĆpiece connector.

OVEN LEVELING

After assembly, the oven should be leveled and

moved to the operating location.

1. The oven can be leveled by adjusting the feet

or casters located on the bottom of each leg.

Flue

Connector

Figure 7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Blodgett ZEPHAIRE-G Spezifikationen Seite 11