Blodgett ZEPHAIRE-G Spezifikationen PDF herunterladen (Seite 8)

Installation

Delivery and Location

DELIVERY AND INSPECTION

All Blodgett ovens are shipped in containers to

prevent damage. Upon delivery of your new oven:

D Inspect the shipping container for external damĆ

age. Any evidence of damage should be noted

on the delivery receipt which must be signed by

the driver.

D Uncrate the oven and check for internal damĆ

age. Carriers will accept claims for concealed

damage if notified within fifteen days of delivery

and the shipping container is retained for inĆ

spection.

The Blodgett Oven Company cannot assume

responsibility for loss or damage suffered in

transit. The carrier assumed full responsibility

for delivery in good order when the shipment

was accepted. We are, however, prepared to

assist you if filing a claim is necessary.

OVEN LOCATION

The well planned and proper placement of your

oven will result in long term operator convenience

and satisfactory performance.

The following clearances must be maintained beĆ

tween the oven and any combustible or nonĆcomĆ

bustible construction.

D Oven body right side - 6" (15 cm)

D Oven body left side - 6" (15 cm)

D Oven body back - 6" (15 cm)

D Oven body bottom - 4.5" (11.4 cm)

The following clearances must be available for serĆ

vicing.

D Oven body sides - 12" (30 cm)

D Oven body back - 12" (30 cm)

NOTE: On gas models, routine servicing can usuĆ

ally be accomplished within the limited

movement provided by the gas hose reĆ

straint. If the oven needs to be moved furĆ

ther from the wall, the gas must first be

turned off and disconnected from the oven

before removing the restraint. Reconnect

the restraint after the oven has been reĆ

turned to its normal position.

It is essential that an adequate air supply to the

oven be maintained to provide a sufficient flow of

combustion and ventilation air.

D Place the oven in an area that is free of drafts.

D Keep the oven area free and clear of all combusĆ

tibles such as paper, cardboard, and flammable

liquids and solvents.

D Do not place the oven on a curb base or seal to

a wall. This will restrict the flow of air and prevent

proper ventilation. Tripping of the blower moĆ

tor's thermal overload device is caused by an

excessive ambient temperature on the right

side of the oven. This condition must be corĆ

rected to prevent permanent damage to the

oven.

D The location must provide adequate clearance

for the air opening into the combustion chamĆ

ber.

Before making any utility connections to this oven,

check the rating plate to be sure the oven specifiĆ

cations are compatible with the gas and electrical

services supplied for the oven.

1. Remove the combustion compartment cover.

The rating plate is attached to the frame on the

left side of the combustion compartment.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Blodgett ZEPHAIRE-G Spezifikationen Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Blodgett ZEPHAIRE-G