Blodgett DFG-200-ES Bedienungsanleitung PDF herunterladen (Seite 8)

Installation

Oven Assembly

DOUBLE SECTION ASSEMBLY

1. Secure the short legs to the bottom sections as de-

scribed.

2. Place the upper section in position on top of the lower

oven.

3. Attach the stacking brackets using the remaining

5/16” bolts shipped with the ovens.

4. Attach the draft diverter to the bottom oven. DO NOT

install the draft diverter guard on the bottom oven.

5. Install the ue riser on the top oven. The bottom of

the ue riser slides down over the draft diverter on the

bottom oven. Secure with 12 screws.

6. Install the ue riser guard as shown below.

OVEN LEVELING

After assembly, the oven should be leveled and moved to

the operating location.

1. The oven can be leveled by adjusting the feet or cast-

ers located on the bottom of each leg.

Flue Riser Guard

Flue Riser

Draft Diverter

Stacking

Brackets

DFG-100-ES Shown

Figure 5

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Keine Kommentare

Blodgett DFG-200-ES Bedienungsanleitung Seite 8