Blodgett ZEPHAIRE-E PLUS Spezifikationen PDF herunterladen (Seite 10)

Installation

Oven Assembly

DOUBLE SECTION ASSEMBLY

NOTE: Old style ovens refer to units with painted ex-

posed rear angle. New style ovens refer to units

with rear angle iron enclosed in steel.

The following instructions apply to stacking two new style

ovens.

1. Secure the short legs to the bottom sections as de-

scribed.

2. Place the upper section in position on top of the lower

oven.

3. Attach the stacking brackets using the remaining

5/16” bolts shipped with the ovens.

4. Attach the ue connector.

The following instructions apply to stacking a new style

oven on an old style oven.

1. Secure the short legs to the bottom sections as de-

scribed.

2. Place the upper section in position on top of the lower

oven.

3. Attach the stacking brackets using the remaining

5/16” bolts shipped with the ovens.

4. Drill a clearance hole for a 5/16” bolt in the angle iron

of the old style oven. Use the holes in the stacking

brackets as a pilot.

5. Attach the stacking brackets to the old style oven with

the 5/16” bolts and nuts provided in the kit.

6. Attach the ue connector.

WARNING!!

When stacking ovens be sure to remove the

single oven ue boxes prior to attaching

three-piece connector.

OVEN LEVELING

After assembly, the oven should be leveled and moved to

the operating location.

1. The oven can be leveled by adjusting the feet or cast-

ers located on the bottom of each leg.

Figure 8

Flue Connector

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Keine Kommentare

Blodgett ZEPHAIRE-E PLUS Spezifikationen Seite 10